Can you tint tung oil

To get maximum protection, you should apply 3 coats of full-strength tung oil. You should also have sanded with steel wool the day after applying each coat. How often does tung oil need to be reapplied? Is tung oil finish waterproof? Tung Oil has been around for many many years.

It was used to preserve wood ships for hundreds of years. The oil penetrates into the wood, providing a relatively hard surface that repels water, giving it a waterproof finish.

Is Tung Oil safe to breathe? According to the FDA Poisonous Plant Database, the primary toxic agent in tung nuts is an albumin that is not present in the tung oil itself. Tung oil is not toxic, but ingestion of the nuts causes nausea, vomiting and diarrhea in mild cases and shock and respiratory depression in severe cases. Is Minwax pure tung oil? Easy to maintain, it is the ideal protective finish for woods that have been refinished because it penetrates wood pores to restore vitality to dry, thirsty wood.

What is the difference between tung oil and tung oil finish? Remember Me? What's New? Results 1 to 8 of 8. Thread: Coloring tung oil. Join Date May Location Wenatchee. Wa Posts Coloring tung oil Can oil based stain be added to tung oil to alter the color slightly? Alternatively would staining the wood first cause subsequent coats of tung oil to not soak in deeply?

Or perhaps cause the stain to " bleed" out? Google Sponsor Google Sponsor. Jack, I have used Transtint dye on two large walnut pieces to even out the brown walnut, red walnut and light walnut plywood. I like the TT color dark walnut but they have a medium brown as well. For me, I got the more uniform color appearance I was after.

My top coats were sprayed as was the dye. Dye is so easy to spray it's not funny. My biggest concern with applying TO by hand over the dye would be lifting and smudging it. I've always sprayed after using a dye so others would know better but I would expect it to lift.

You may be better off toning a shellac coat with TT dye. Spraying would most likely give you more uniform results but you may be able to apply it by hand with decent results.

It may take some practice. Walnut also takes oil based penetrating stains like Minwax very well. This would lock in the wood being it has a binder and a hand applied top coat should be fine with adequate drying time in between.

Roly Member. If you are finishing with a oil base product I would suggest using a powdered water base dye. The oil will not pick up the water based dye the same as a universal dye that will dissolve in many types of finishes. Another option is to spray a light coat of shellac over the dye to seal it, but if it is a true tung oil instead of a tung oil finish oil varnish blend it may not penetrate the same which may look different.

Always try on scrap to see if the results are what you want. Don't test on project. In fact, this is the best approach. Thanks in advance,. I do this add stain to my varnish for the boat. I really just wiped it lightly with my oily rag and wiped it off immediately. My fingerboard now looks dramatically better. Now would I? I could not get curly maple to pop and cherry got blotched.

I'm sure it is a rate of absorption thing.